GPS를 이용한 측위 정밀도가 향상되기 시작하면서 GPS안테나의 정확한 옵셋 결정을 위한 캘리브레이션이 중요시되고 있다. 본 연구에서는 국토지리정보원에서 운용하고 있는 GPS 상시관측소 성과의 정밀도 향상을 위하여 GPS 안테나에 대한 절대캘리브레이션을 실시하고 그 결과를 비교 평가하였다. 국토지리정보원 GPS 위성기준점 중 4개를 선정하여 안테나 절대캘리브레이션을 실시한 결과와 IGS 표준 안테나 모델과는 평면 최대 1.1mm, 수직 최대 1.6mm의 옵셋 차이가 나타났다. 한편, 절대캘리브레이션에 의하여 계산된 안테나 위상중심변동(PCV)모델 적용결과, IGS 표준 위상중심변동 모델을 적용한 성과와 평면 최대 2.8mm, 수직최대 10.0mm의 차이가 나타나는 것으로 분석됐다.
The GPS positioning accuracy has been calibrated to determine the exact offset of the GPS antenna using is beginning to be improved. In this study, in order to improve the accuracy of GPS satellite reference point achievements that are operated by the National Geographic Information Institute to carry out absolute calibration of GPS antenna, we compared the results were evaluated. Results by selecting four of the reference point of the GPS satellite by National Geographic Information Institute, absolute calibration of the antenna was performed, there was a difference between the maximum offset plane 1.1mm, 1.6mm of maximum antenna vertically within IGS standard antenna model. On the other hand, the result of changes in the antenna phase center variation(PCV) model, that the difference between 2.8mm maximum plane, 10.0mm maximum vertical results and applying the model variation phase center IGS standard antenna model will be displayed, which is calculated by the calibration absolute we found.