메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
임영택 (정호그룹) 류재만 (정호그룹) 이유리 (정호그룹)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제30권 제7호
발행연도
2016.7
수록면
26 - 31 (6page)
DOI
10.5207/JIEIE.2016.30.7.026

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Complaints of HIGH-Ra LED lighting based on dimming control are steadily occurred by the quality degradation due to the luminance deviation. Consequently, constructors and electrical contractors currently avoid the sales and distribution of this lighting.
This problem was appeared because the characteristics of each electronic device such as wavelength band, linearity, gain characteristic, off-set and cut-off of the HIGH-Ra LED lighting that CRI value is improved by phosphor or mixed LED light sources are not considered. It can be sufficiently improved by an inspection method in a whole range of dimming level. However, the present inspection methods are only conducted by lighting test, actinography or aging test.
Therefore, the paper proposes the dynamic calibration method, considering the functions of dynamic check equipment and interlocking․calibration based on dimming level, for the production quality of the HIGH-Ra LED lighting in order to overcome the disadvantages of the present inspection. This method offers the sequential areal inspection and narrow range auto calibration, to detect the defective parts and analyze the corresponding causes. At the same time, it can improve not only production quality and productivity, but also reduce the inspection time and production costs.

목차

Abstract
1. 서론
2. 디밍 제어 시 문제점
3. 양산품질 확보 방안
4. 결론
References

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-565-000775685