메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이동윤 (청주대학교) 한천구 (청주대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第33卷 第2號 (通卷 第340號)
발행연도
2017.2
수록면
37 - 44 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this research, the influence of desulfurized gypsum (FGD) with different carbon removing methods of 0.3 mm sieving, and 500℃ high temperature combustion on high volume blast furnace slag cement mortar was evaluated with different replacement ratios of 1 : 2, and 1 : 4 for blast furnace slag. As an experiment result, flow was generally decreased with FGD replacing while slight increased was shown with 5 to 10 % of replacement for 1 : 4 mortar. As FGD replacement, air content was reduced setting time was shortened. Compressive strength was generally decreased with 1 : 2 mortar mixtures, but for 1 : 4 mortar mixture, the highest compressive strength value was obtained when FGD was replaced about 10 % due to the generation of ettringite. Drying shrinkage was decreased and absorption rate was increased with increased FGD replacement ratio. Overall, as a carbon removing method of FGD, 0.3 mm sieving showed better results than 500℃ high temperature combustion, and the mortar mixture was the most appropriate results were obtained with 1 : 4 mixture and 10 % of FGD replacement ratio.

목차

Abstract
1. 서론
2. 실험계획 및 방법
3. 실험결과 및 분석
4. 결론
REFERENCES

참고문헌 (9)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-540-002318352