지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.6
- 수록면
- 292 - 298 (7page)
- DOI
- 10.7735/ksmte.2017.26.3.292
이용수
초록· 키워드
오류제보하기
Numerical analysis for various design parameters should be preceded by optimal design of composite materials. Numerous studies have been conducted on the bolting of interconnecting beams. In this study, the response surface method was applied to optimize the design of bolted joints connected by laminated wood composite beams. The response surface was created by combining the FEA code for composite analysis and the algorithm for forming the response surface. Optimization on this response surface was performed with a genetic algorithm to derive the results. The determination of the optimum bolt-hole position for the connection of composite beams is an optimization problem. Tsai-Wu composite failure index, maximum deflection, and simple von Mises stress are set as the objective functions. It has been proved that the design results of the optimized bolt-hole are superior to the design performance of the existing conventional bolt-hole position.
목차
ABSTRACT
1. 서론
2. FEA수치해석 및 최적화
3. 결론
References
참고문헌 (12)
참고문헌 신청
Toussaint, E., Durif, S., Bouchair, A., Grediac, M., 2017, Strain Measurements and Analyses Around the Bolt Holes of Structural Steel Plate Connections Using Full-Field Measurements, Engineering Structure, 131:15 148-162.
Soutis, C., Fleck, N. A., Curtis, P. T., 1991, Hole-Hole Interaction in Carbon Fiber/Epoxy Laminates Under Uniaxial Compression, Composites, 22:1 31-38.
Yeh, H. Y., Le, M. D., 1993, Mutual Influence about Stress Concentration of Holes in Composite Plates, Journal of Reinforced Plastics and Composites, 12 37-37.
McCarthy, C. T., Gray, P. J., 2011, An Analytical Model for the Prediction of Load Distribution in Highly Torqued Multi-bolt Composite Joints, Composite Structures, 93 287-298.
Ireman, T., 1998, Three-Dimensional Stress Analysis of bolted Single-lap Composite Joints Composite Structures, 43:3 195-216.
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Optimization of Joint Hole Position Design for Composite Beam Clamping
한국기계가공학회지
2019 .02
-
반응표면법에 의한 볼트홀 최적화
대한기계학회 춘추학술대회
2018 .12
-
Recess Bolt Joint Stiffness Optimization by Design Parameter
한국자동차공학회 추계학술대회 및 전시회
2019 .11
-
Reliabilities of distances describing bolt placement for high strength steel connections
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Reliabilities of distances describing bolt placement for high strength steel connections
Structural engineering and mechanics : An international journal
2015 .01
-
New Anchorage Technique for GFRP Flexural Strengthening of Concrete Beams Using Bolts-End Anchoring System
International Journal of Concrete Structures and Materials
2023 .07
-
Design Optimization of Double-array Bolted Joints in Cylindrical Composite Structures
International Journal of Aeronautical and Space Sciences
2016 .09
-
볼트풀림 유한요소해석
한국기계가공학회 춘추계학술대회 논문집
2017 .10
-
볼트 제조장치를 위한 자동 공급 유닛 개발
한국정밀공학회 학술발표대회 논문집
2019 .05
-
Optimization Identification for Connecting Parameters of Bolted Joints Based on Thin-Layer Element Method
한국생산제조학회 학술발표대회 논문집
2016 .10
-
Static behavior of high strength friction-grip bolt shear connectors in composite beams
Steel and Composite Structures, An International Journal
2022 .02
-
Influence of shear bolt connections on modular precast steel-concrete composites for track support structures
Steel and Composite Structures, An International Journal
2018 .01
-
Simplified criteria for finite element modelling of European preloadable bolts
Steel and Composite Structures, An International Journal
2017 .01
-
볼트결합 구조의 부재 강성 연구
한국생산제조학회지
2018 .06
-
Vision-based technique for bolt-loosening detection in wind turbine tower
Wind & structures
2015 .01
-
플랜지 볼트 체결거리에 따른 두 볼트 중심으로부터 이격거리에 대한 면압 크기 및 분포영역의 특성
대한기계학회 춘추학술대회
2018 .12
-
Detection and location of bolt group looseness using ultrasonic guided wave
Smart Structures and Systems, An International Journal
2019 .01
-
Optimal location of a single through-bolt for efficient strengthening of CHS K-joints
Structural Engineering and Mechanics, An Int＇l Journal
2024 .01
-
저니켈 듀플렉스계 스테인리스강 1행1열과 1행2열 볼트접합부의 구조거동에 관한 실험적 연구
대한건축학회논문집
2021 .10
-
Research on the tightening strategy of bolted flange for contact stiffness of joint surface
Structural Engineering and Mechanics, An Int＇l Journal
2022 .08
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-003-000911271