메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이훈희 (경북대학교) 이동목 (맥스로텍) 양승한 (경북대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.36 No.5
발행연도
2019.5
수록면
463 - 469 (7page)
DOI
10.7736/KSPE.2019.36.5.463

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The parallel kinematic machine (PKM), which is applied Exechon mechanism, is efficiently used for manufacturing industry due to its agile movement, flexibility and high rigidity. On-Machine measurement (OMM) in high-dof manufacturing machines such as the PKM and five-axis machine tools has importantly used for processed part measurement, coordinate system set and machine performance evaluation. In this study, measurement and compensation of touch probe offset, which occurs measurement error of the OMM, are carried out for the PKM. A dependent rotational motion is occurred due to kinematic constraint, and causes non-constant offset of a touch probe. The dependent rotational motion is calculated via inverse kinematics analysis. The probe offset is accurately measured using a master ring with considering the analyzed dependent rotational motion angle. In addition, measurement procedure to eliminate the offset induced measurement error is presented. To verify the proposed technique, circular tests using a master ring and commercial touch probe on the PKM were performed. Circularity measurement deviation of a master was reduced 65% without the PKM’s kinematic error calibration.

목차

1. 서론
2. 병렬기구 기계의 구속 운동 분석
3. 종속적 회전 운동을 고려한 터치프로브 오프셋 측정 및 보정
4. 실험
5. 결론
REFERENCES

참고문헌 (20)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-555-000695480