메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
황주원 (서울과학기술대학교) 김덕규 (서울과학기술대학교) 박창용 (서울과학기술대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2019년도 하계학술발표대회 논문집
발행연도
2019.6
수록면
765 - 768 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study was carried out to measure the pressure drop and visualize the flow in the flow path between the chevron corrugated two plates in a heat exchanger. A test section was made to visualize the flow characteristics in the flow channels formed by a metal real heat exchanger plate and transparent replica of the counterpart plate. A simple closed loop test facility was made to do the experiment with the change of volume flow rate. The visualization was performed by a high speed camera with 800 fps and air bubbles were injected in the flow to visualize the flow distribution in the channels on the two plates. The measured pressure drop agreed well with the general trend of the pressure drop change with the increase of flow rate. The visualized flow patterns showed that the flow was not evenly distributed in the channels between the two plates, due to the left-sided inlet and outlet location od the flow. The flow visualization with air bubbles showed the limitation to visualize the actual flow velocity distribution on the two plates because Buoyant effect was dominant under upward flow conditions.

목차

Abstract
1. 서론
2. 실험방법 및 데이터 처리
3. 실험결과 및 분석
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2020-553-000238402