지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
This paper presents the structural model verification process of whole wind turbine blade including blade model which proposed in Part1 paper. The National Renewable Energy Laboratory (NREL) Phase VI wind turbine which the wind tunnel and structural test data has publicly available is used for the study. In the Part1 of this paper, the processes of structural model development and verification process of blade only are introduced. The whole wind turbine composed by blade, rotor, nacelle and tower. Even though NREL has reported the measured values, the material properties of blade and machinery parts are not clear but should be tested. Compared with the other parts, the tower which made by steel pipe is rather simple. Since it does not need any considerations. By the help of simple eigen-value analysis, the accuracy of structural stiffness and mass value of whole wind turbine system was verified by comparing with NREL's reported value. NREL has reported the natural frequency of blade, whole turbine, turbine without blade and tower only models. According to the comparative studies, the proposed material and mass properties are within acceptable range, but need to be discussing in future studies, because our material properties of blade does not match with NREL's measured values.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
STRUCTURAL OPTIMIZATION FOR NREL 5MW WIND TURBINE BLADE USING RESPONSE SURFACE METHOD
AFORE
2015 .11
-
EFFECT OF ADDED MASS IN BLADE ON FATIGUE LOADS OF NREL 5MW OFFSHORE WIND TURBINE
AFORE
2015 .11
-
Structural Design of Composite Blade and Tower for Small Wind Turbine System
International Journal of Aerospace System Engineering
2015 .06
-
INVESTIGATION ON OPTIMAL LOCATION OF SEPARATION PART FOR LARGE SCALE WIND TURBINE BLADE
International Journal of Aerospace System Engineering
2024 .06
-
Structural Test and Evaluation of Composite Blade for Wind Turbine System
International Journal of Aerospace System Engineering
2016 .06
-
NREL 5MW 풍력발전기용 블레이드의 구조 안전성 평가
대한기계학회 춘추학술대회
2015 .04
-
NREL 5MW급 61.5m 블레이드 2차원 모달 해석
항공우주시스템공학회 학술행사 논문집
2018 .04
-
블레이드 변형을 고려한 NREL 5MW 풍력 터빈 공력 형상 최적설계
한국전산유체공학회 학술대회논문집
2016 .11
-
Analysis of the effect of blade positions on the aerodynamic performances of wind turbine tower-blade system in halt states
Wind & structures
2017 .01
-
극소형 풍력발전기 블레이드의 형상변화에 의한 성능향상 연구
대한기계학회 춘추학술대회
2018 .12
-
DYNAMIC FORCE ANALYSIS ON NOVEL AIRFOILS USING BLADE ELEMENT THEORY FOR SMALL WIND TURBINE BLADES
AFORE
2017 .11
-
풍력 발전기 블레이드의 구조 개선에 대한 연구
풍력에너지저널
2016 .06
-
The aerostatic response and stability performance of a wind turbine tower-blade coupled system considering blade shutdown position
Wind & structures
2017 .01
-
움직임 추정 및 머신 러닝 기반 풍력 발전기 모니터링 시스템
전기학회논문지
2017 .10
-
Prediction of Aerodynamic Loads for NREL Phase VI Wind Turbine Blade in Yawed Condition
International Journal of Aeronautical and Space Sciences
2016 .06
-
Analysis and structural design of various turbine blades under variable conditions: A review
Advances in materials research : AMR
2019 .01
-
Performance Test of 3D Printed Blades for a Scaled Wind Turbine in a Wind Tunnel
Journal of the Korean Society for Precision Engineering
2020 .09
-
Structural Design and Structural Safety Assessment of NREL 5MW Blade
한국신·재생에너지학회 학술대회 초록집
2015 .11
-
DNV GL Bladed 를 이용한 NREL 5 MW 풍력터빈의 축하중 확인
한국정밀공학회 학술발표대회 논문집
2020 .09
-
FAST, GH Bladed 및 CFD기법을 이용한 5MW 해상풍력터빈 시스템 설계하중조건 해석 및 비교
한국유체기계학회 논문집
2015 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0