지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Structural Engineering and Mechanics, An Int'l Journal Structural Engineering and Mechanics, An Int'l Journal Vol.71 No.3
- 발행연도
- 2019.1
- 수록면
- 317 - 327 (11page)
이용수
초록· 키워드
오류제보하기
The aim of this paper is to present the most important issues on the implementation, operation and maintenance of foundation for machines. The article presents the newest solutions both in terms of technology implementation as well as materials used in construction of such structures. Foundations for machines are special building structures used to transfer loads from an operating machine to the subsoil. The purpose of these foundations is not just to transfer loads, but also to reduce vibrations occurring during operation of the machine, i.e. their damping and preventing redistribution to other elements of the building. It should be noted that foundations for machines (particularly foundations for hammers) are the most dynamically loaded building structures. For these reasons, they require precise static and dynamic calculations, accuracy in their implementation and care for them after they have been made. Therefore, the paper in detail present the guidelines regarding: design, construction and maintenance of structures of this type. Furthermore, the most important parameters and characteristics of materials used for the construction of these foundations are described. As a result of the conducted analyzes, it was found that the concrete mix, in foundations for machines, should have a low water/binder ratio. For its execution, it is necessary to use broken aggregates from igneous rocks and binders modified with mineral additives and chemical admixtures. On the other hand, the reinforcement of composites should contain a large amount of structural reinforcement to prevent shrinkage cracks.
목차
등록된 정보가 없습니다.
참고문헌 (68)
참고문헌 신청
M.R.M. Aliha / 2012 / Experimental determination of tensile strength and K_Ic_ of polymer concretes using semi-circular bend(SCB) specimens / Structural Engineering and Mechanics, An Int＇l Journal 43(6):823~833
M.R.M. Aliha / 2018 / Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading / Polymer Testing 67:75~83
M.R.M. Aliha / 2018 / Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen / Construction and Building Materials 190:612~622
Filippo Berto / 2017 / Mixed mode fracture / Theoretical and Applied Fracture Mechanics 91:1
Bhandari, P. K. / 2014 / Dynamic analysis of machine foundation / Int. J. Innov. Res. Scie. Eng. Technol 3(Special Issue 4):169~176
M.R.M. Aliha / 2018 / Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading / Polymer Testing 67:75~83
M.R.M. Aliha / 2018 / Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen / Construction and Building Materials 190:612~622
Filippo Berto / 2017 / Mixed mode fracture / Theoretical and Applied Fracture Mechanics 91:1
Bhandari, P. K. / 2014 / Dynamic analysis of machine foundation / Int. J. Innov. Res. Scie. Eng. Technol 3(Special Issue 4):169~176
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Experiments on influence of foundation mass on dynamic characteristic of structures
Structural engineering and mechanics : An international journal
2018 .01
-
The effects of foundation size on the seismic performance of buildings considering the soil-foundation-structure interaction
Structural engineering and mechanics : An international journal
2016 .01
-
The effects of foundation size on the seismic performance of buildings considering the soil-foundation-structure interaction
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Experiments on influence of foundation mass on dynamic characteristic of structures
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
실험계획법 기반 공작기계 바닥기초에 관한 연구
한국정밀공학회 학술발표대회 논문집
2017 .12
-
Forced vibration of surface foundation on multi-layered half space
Structural Engineering and Mechanics, An Int＇l Journal
2015 .01
-
Forced vibration of surface foundation on multi-layered half space
Structural engineering and mechanics : An international journal
2015 .01
-
Seismic analysis in pad concrete foundation reinforced by nanoparticles covered by smart layer utilizing plate higher order theory
Steel and Composite Structures, An International Journal
2020 .01
-
A dynamic foundation model for the analysis of plates on foundation to a moving oscillator
Structural engineering and mechanics : An international journal
2016 .01
-
Damage assessment based on static and dynamic responses applied to foundation beams
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Experimental investigation on the effectiveness of under-foundation isolator against train-induced vibrations considering foundation type
Structural Engineering and Mechanics, An Int＇l Journal
2024 .01
-
Dynamic system identification of a walking machine tool for high performance milling operations
한국생산제조학회 학술발표대회 논문집
2020 .10
-
이종 장비에서의 학습모델 성능유지를 위한 방법론 제안
한국정밀공학회 학술발표대회 논문집
2023 .11
-
Tall Building Foundation Design
대한토목학회지
2020 .06
-
Deep Foundations for High-Rise Buildings in Hong Kong
International journal of high-rise buildings
2015 .01
-
선로전환기의 전환전류를 이용한 노화 특성 분석
전기학회논문지
2017 .12
-
대형기계 및 고출력기계의 소음 정보 데이터베이스
한국기계기술학회지
2018 .01
-
IMPLEMENTATION OF LOAD PREDICTION AGENT BASED ON MACHINE LEARNING FOR BUILDING ENERGY MANAGEMENT SYSTEM
AFORE
2017 .11
-
원심모형실험을 활용한 얕은 기초가 있는 다자유도 구조물의 지진응답
한국지진공학회 논문집
2022 .05
-
다양한 기초 형식에 따른 단자유도 구조물 지진하중 평가를 위한 동적 원심모형실험
한국지진공학회 논문집
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0