메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
노희정 (Kimpo University) 양전성 (Daeyeong Ubitec.)
저널정보
한국조명·전기설비학회 조명·전기설비학회논문지 조명·전기설비학회논문지 제36권 제8호
발행연도
2022.8
수록면
33 - 38 (6page)
DOI
10.5207/JIEIE.2022.36.8.033

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Most tripler research papers tend to design it with a band pass filter at the output terminal. A tripler with a band pass filter has a disadvantage in using a broadband frequency because the bandwidth of the target frequency is narrow. Therefore, as a solution to this problem, the topic of the thesis was to design a tripler with a wide bandwidth by applying a band stop filter to the output terminal.
In this paper, a tripler with a band pass filter and a band stop (notch) filter at the output terminal using a pHEMT device as an active device was designed, and then two triplers were simulated.
Comparing the characteristics of the two triplers, at the target frequency of 7.2GHz, the output power of the tripler with a band pass filter is 18.9dBm (conversion gain, 2.76dB), and the output power of the tripler with a band stop filter is 23.1dBm (conversion gain, 3.63dB). Therefore, the conversion gain of the tripler with the band stop filter is about 30% better than that of the tripler with the band pass filter. The bandwidth of the tripler with the band pass filter is narrow, and the bandwidth of the tripler with the band stop filter is about 2GHz from 6GHz to 8GHz centered on 7.2GHz, and it shows broadband characteristics. Therefore, when comparing the characteristics of the tripler with the band stop filter and the band pass filter, it can be confirmed that the tripler with the band stop filter is excellent.

목차

Abstract
1. 서론
2. 본론
3. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0