메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
문정민 (부산대학교) 윤병조 (부산대학교)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제21권 제2호(통권 제107호)
발행연도
2018.4
수록면
11 - 18 (8page)
DOI
10.5293/kfma.2018.21.2.011

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Bubble parameters such as void fraction, bubble velocity, and interfacial area concentration(IAC) are important for an accurate prediction of bubble behaviors in the two-phase flow. The 4-sensor probe method is one of the representative multi-sensor probe techniques which can measure the local bubble parameters regardless of bubble shape and bubble behavior. However, there is a lack of evaluation as to whether it is applicable to flow conditions in which distorted and slug bubbles appear. Therefore, in this study, the performance of 4-sensor probe was investigated with numerical simulations under the postulated flow conditions for various bubble shapes. It is found from the study that bubble parameters are measured more accurately as the radial distance between sensors is close. For the IAC, the method proposed by Revankar et al. showed the best accuracy. Also, in order to verify the design of the optimized 4-sensor optical fiber probe, verification experiment was performed in the air-water flow condition. It showed that the 4-sensor optical fiber probe(4S-OFP) measured the void fraction, bubble velocity, and IAC within 10 %, 8 %, and 22 % of deviations against visualization data, respectively.

목차

ABSTRACT
1. 서론
2. 4-센서 광섬유 프로브를 이용한 기포 변수 측정 기법
3. 수치 모의 기법을 이용한 센서 성능 평가
4. 4-센서 광섬유 프로브 성능 검증 실험
5. 결론 및 고찰
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-554-001886317