메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
쑨리롱 (Seoul National University of Science and Technology) 이찬우 (Seoul National University of Science and Technology) 김준현 (Seoul National University of Science and Technology) 성재용 (Seoul National University of Science and Technology) 이동훈 (Seoul National University of Science and Technology) 이인환 (B&L Biotech)
저널정보
한국생산제조학회 한국생산제조학회지 한국생산제조학회지 Vol.34 No.1
발행연도
2025.2
수록면
24 - 33 (10page)
DOI
10.7735/ksmte.2025.34.1.24

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study employed Eulerian-PBM analysis to investigate the flow phenomena in which bubbles from a bubble generator coalesce and break up in a tank. A 1 l tank model was optimally represented. Based on the bubble size and dispersion range observed in the experiment, and by varying the bubble size introduced through this structure, 20 µm bubbles were found to coalesce into larger bubbles near the water surface, reducing the volume fraction in the tank due to degassing. The number density of bubbles in the tank increased rapidly at an injected flow rate of 1.1 l/min . Additionally, as the volume fraction of injected bubbles increased, internal circulation caused more active bubble diffusion, further increasing the number density of bubbles in the tank. However, as the size of the injected bubbles increased during the flow, they coalesced into larger bubbles, resulting in a decrease in number density.

목차

ABSTRACT
1. 서론
2. 순환계 실험 장치 구성
3. 해석 모델
4. 결과 및 고찰
5. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-151-25-02-092305433