지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 국제구조공학회 Smart Structures and Systems, An International Journal Smart Structures and Systems, An International Journal Vol.27 No.1
- 발행연도
- 2021.1
- 수록면
- 123 - 137 (15page)
이용수
초록· 키워드
오류제보하기
Experimental and discrete element methods were used to investigate the effects of both of the non-persistent joints and hole on the failure behaviour of rock pillars under uniaxial compressive test. Concrete samples with dimension of 150 mm × 150 mm × 50 mm were prepared. Within the specimen, two echelon non-persistent notches and one hole were provided. The hole was inserted at the middle of the specimen. two joints were distributed on the three diagonal planes. the angle of diagonal plane related to horizontal axis were 15°, 30° and 45°. The angle of joints related to diagonal plane were 30°, 45°, 60°. Totally, 9 different configuration systems were prepared. In these configurations, the length of joints was taken as 20 mm. diameter of hole was 20 mm. Similar to those for joints configuration systems in the experimental tests, 9 models with different echelon non-persistent joint were prepared in numerical model. The axial load was applied to the model by rate of 0.05 mm/min. the results show that the failure process was mostly governed by both of the non-persistent joint angle and diagonal plane angle. The compressive strengths of the specimens were related to the fracture pattern and failure mechanism of the discontinuities. It was shown that the shear behaviour of discontinuities is related to the number of the induced tensile cracks which are increased by increasing the joint angle. The strength of samples increases by increasing both of the joint angle and diagonal plane angle. The failure pattern and failure strength are similar in both methods i.e., the experimental testing and the numerical simulation methods.
목차
등록된 정보가 없습니다.
참고문헌 (38)
참고문헌 신청
B. Amadei / 1988 / Strength of a regularly jointed rock mass under biaxial and axisymmetric loading conditions / International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 25(1):3~13
N. Coli / 2011 / In situ non-conventional shear tests for the mechanical characterisation of a bimrock / International Journal of Rock Mechanics and Mining Sciences 48(1):95~102
N.G.W. Cook / 1976 / Seismicity associated with mining / Engineering Geology 10(2-4):99~122
P. A. Cundall / 1979 / A discrete numerical model for granular assemblies / Géotechnique 29(1):47~65
Kamran Esmaieli / 2010 / Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine / International Journal of Rock Mechanics and Mining Sciences 47(6):915~926
N. Coli / 2011 / In situ non-conventional shear tests for the mechanical characterisation of a bimrock / International Journal of Rock Mechanics and Mining Sciences 48(1):95~102
N.G.W. Cook / 1976 / Seismicity associated with mining / Engineering Geology 10(2-4):99~122
P. A. Cundall / 1979 / A discrete numerical model for granular assemblies / Géotechnique 29(1):47~65
Kamran Esmaieli / 2010 / Estimating geometrical and mechanical REV based on synthetic rock mass models at Brunswick Mine / International Journal of Rock Mechanics and Mining Sciences 47(6):915~926
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Study of tensile behavior of Y shape non-persistent joint using experimental test and numerical simulation
Computers and Concrete, An International Journal
2020 .01
-
A review paper about experimental investigations on failure behaviour of non-persistent joint
Geomechanics & engineering
2017 .01
-
Effect of normal load on the crack propagation from pre-existing joints using Particle Flow Code (PFC)
Computers and Concrete, An International Journal
2017 .01
-
Shear behavior of non-persistent joints in concrete and gypsum specimens using combined experimental and numerical approaches
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
Mechanical and fracture behavior of rock mass with parallel concentrated joints with different dip angle and number based on PFC simulation
Geomechanics & engineering
2015 .01
-
A review of experimental and numerical investigations about crack propagation
Computers and Concrete, An International Journal
2016 .01
-
Experimental and numerical investigation of the effect of bridge area and its angularities on the failure mechanism of non-persistent crack in concrete-like materials
Smart Structures and Systems, An International Journal
2021 .01
-
상대가속도 적분을 통한 IMU 기반 신체 관절각과 상대위치 동시 추정
제어로봇시스템학회 논문지
2020 .09
-
Computational methodology to determine the strength of reinforced concrete joint
Advances in computational design
2016 .01
-
Investigation of mechanical behaviour of non-persistent jointed blocks under uniaxial compression
Geomechanics & engineering
2018 .01
-
Seismic behavior and strength of L-shaped steel reinforced concrete column-concrete beam planar and spatial joints
Steel and Composite Structures, An International Journal
2021 .01
-
Experimental study on seismic behavior of exterior composite beam-to-column joints with large size stiffened angles
Steel and Composite Structures, An International Journal
2020 .01
-
인체 동작 시 관절 부하에 대한 허용 능력 평가 시스템
한국CDE학회 학술발표회 논문집
2015 .02
-
주관과 지관의 폭이 같은 예각 X형 각형강관접합부에 대한 현행 설계법 평가
한국강구조학회 학술대회 발표집
2021 .06
-
관절각 측정을 위한 적외선 각도 센서 연구
전기학회논문지
2015 .05
-
이음철근이 보강된 반단면 프리캐스트 판넬 이음부의 강도 안전성 평가
한국안전학회지
2019 .01
-
동종금속 및 이종금속 단일 겹침 접착 시편의파손모드 및 파손강도에 관한 연구
한국전산구조공학회논문집
2019 .01
-
Shear strength model for reinforced concrete beam-column joints based on hybrid approach
Computers and Concrete, An International Journal
2019 .01
-
Influence of Patterns on Mechanical Properties of Ultrasonically Welded Joints in Copper Substrate and Wire
Metals and Materials International
2024 .08
-
Analysis of stress distribution around tunnels by hybridized FSM and DDM considering the influences of joints parameters
Geomechanics & engineering
2016 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0