메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이준경 (경남대학교) 이치영 (부경대학교) 이창빈 (경남대학교) 김석동 (경남대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 창립 70주년 기념 학술대회
발행연도
2015.11
수록면
3,271 - 3,276 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In the present experimental study, the effect of gas- and liquid-injected methods on formation of bubble and liquid slug at merging micro T-junction of a square micro-channel with 600 ㎛ × 600 ㎛ in dimensions was investigated. As the test fluids, the nitrogen and water were used. The superficial velocities of the liquid and gas were in the ranges of 0.01 - 1 ㎧ and 0.2 - 1 ㎧, respectively, where the Taylor flow occurred. The bubble length, liquid slug length, bubble velocity, and the bubble generation frequency were measured through analyzing the captured images obtained using a high-speed camera. Under the similar inlet superficial velocity condition, in the case of gas injection to main channel at merging T-junction(T_gas-liquid), the lengths of bubble and liquid slug were longer and the bubble generation frequency was lower than in the case of gas injection to main channel at merging T-junction(T_liquid-gas). On the other hand, for both cases, the bubble velocity was almost the same.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험 결과
참고문헌(References)

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-550-002168149