지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국콘크리트학회 International Journal of Concrete Structures and Materials International Journal of Concrete Structures and Materials Vol.10 No.3 Supplement
- 발행연도
- 2016.9
- 수록면
- 1 - 17 (17page)
이용수
초록· 키워드
오류제보하기
Recently, advanced transit systems are being constructed to reduce traffic congestions in metropolitan areas. For these projects, curved bridges with various curvatures are required. Many curved bridges in the past were constructed using aesthetically unpleasant straight beams with curved slabs or expensive curved steel box girders with curved slabs. Therefore, many recent studies have been performed to develop less expensive and very safe precast prestressed concrete (PSC) curved girder. One method of reducing the construction cost of a PSC curved girder is to use a reusable formwork that can easily be adjusted to change the curvature and length of a girder. A reusable and curvature/dimension adjustable formwork called Multi-tasking formwork is developed for constructing efficient precast PSC curved girders. With the Multi-tasking formwork, two 40 m precast PSC box girders with different curvatures were constructed to build a two-girder curved bridge for a static flexural test to evaluate its safety and serviceability performance. The static flexural test results showed that the initial cracking load was 1400 kN, exceeding the design cracking load of 450 kN. Also, the code allowed deflection of 50 mm occurred at a load of 1800 kN, verifying the safety and serviceability of the precast PSC curved bridge constructed using the multi-tasking formwork.
목차
Abstract
1. Introduction
2. Multi-Tasking Formwork
3. Nonlinear 3D Simulation to Evaluate the Structural Performance
4. Full-Scale Static Experiment
5. Experimental Results and Discussions
6. Comparison of Simulation and Test Results
References
참고문헌 (17)
참고문헌 신청
[학술지(정기간행물)] - Amorn, W. / 2008 / Curved, precast, pretensioned concrete I-girder bridges / PCI Journal 53 (6) : 48 ~ 66
[학술지(정기간행물)] - Dong, J. / 2010 / Behavior of hollow tubular-flange girder systems for curved bridges / Journal of Structural Engineering 136 (2) : 174 ~ 182
[학술지(정기간행물)] - Weiwei Lin / 2010 / Analysis, Design and Construction of Curved Composite Girder Bridges: State-of-the-Art / International Journal of STEEL STRUCTURES 10 (3) : 207 ~ 220
[학술지(정기간행물)] - Linzell, D. G. / 2004 / Experimental and analytical studies of a horizontally curved steel I-girder bridge during erection / Journal of Bridge Engineering 9 (6) : 521 ~ 530
[학술지(정기간행물)] - Mansur, M. A. / 1981 / Study of design methods for reinforced concrete curved beams / ACI Journal 78 (21) : 226 ~ 254
[학술지(정기간행물)] - Dong, J. / 2010 / Behavior of hollow tubular-flange girder systems for curved bridges / Journal of Structural Engineering 136 (2) : 174 ~ 182
[학술지(정기간행물)] - Weiwei Lin / 2010 / Analysis, Design and Construction of Curved Composite Girder Bridges: State-of-the-Art / International Journal of STEEL STRUCTURES 10 (3) : 207 ~ 220
[학술지(정기간행물)] - Linzell, D. G. / 2004 / Experimental and analytical studies of a horizontally curved steel I-girder bridge during erection / Journal of Bridge Engineering 9 (6) : 521 ~ 530
[학술지(정기간행물)] - Mansur, M. A. / 1981 / Study of design methods for reinforced concrete curved beams / ACI Journal 78 (21) : 226 ~ 254
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
곡선 플레이트 거더의 후-좌굴 강도를 평가하기 위한 매개변수 해석
한국강구조학회 학술대회 발표집
2021 .06
-
프리캐스트 PSC 곡선거더교의 장기계측
한국콘크리트학회 학술대회 논문집
2018 .11
-
프리캐스트 곡선 PSC 박스 거더의 구조성능 검증 및 적용사례
콘크리트학회지
2016 .11
-
I형 단면과 BOX형 단면을 갖는 프리캐스트 분절 PSC 거더의 실험적 연구
복합신소재구조학회논문집
2015 .01
-
PSC 박스 거더 철도교량 최적단면
한국철도학회 학술발표대회논문집
2015 .10
-
PSC거더 장경간화 시 횡만곡현상을 제어하는 거더 기술 소개
콘크리트학회지
2022 .09
-
60m PSC I-거더의 휨 거동 실험
한국콘크리트학회 학술대회 논문집
2018 .05
-
Computation of design forces and deflection in skew-curved box-girder bridges
Structural Engineering and Mechanics, An Int＇l Journal
2021 .01
-
곡면유리 성형 제조 시스템에 대한 연구
한국정밀공학회 학술발표대회 논문집
2018 .10
-
편심하중이 작용하는 수평 곡선 I 형 거더의 휨·비틀림 상호작용
한국산학기술학회 논문지
2015 .09
-
프리캐스트 바닥판이 적용된 고강도 PSC Girder 철도교 적용성 연구
한국철도학회 논문집
2018 .06
-
정적재하시험을 통한 장경간 중공 웨브 PSC 거더교의 내하력 평가
한국구조물진단유지관리공학회 논문집
2018 .01
-
An Assessment on the Effect of Cross-Frame Spacing on the Lateral Torsional Buckling Capacity and Warping Stress of Non-Composite Curved Bridge Girder System
대한토목학회 학술대회
2015 .10
-
PSC 표준 거더 모듈을 이용한 교량 설계 방법
한국콘크리트학회 학술대회 논문집
2022 .05
-
양단 균일 모멘트를 받는 수평곡선 I형 강재 거더의 횡-비틀림 거동 및 강도 산정 방안
한국강구조학회 논문집
2018 .02
-
Improved prestressed concrete girder with hybrid segments system
Structural engineering and mechanics : An international journal
2018 .01
-
Experimental and analytical behavior of a prestressed U-shaped girder bridge
Structural engineering and mechanics : An international journal
2017 .01
-
Evaluating fire resistance of prestressed concrete bridge girders
Structural engineering and mechanics : An international journal
2017 .01
-
Evaluating fire resistance of prestressed concrete bridge girders
Structural Engineering and Mechanics, An Int＇l Journal
2017 .01
-
60m급 PSC 장지간 거더의 구조거동 실험방법
한국콘크리트학회 학술대회 논문집
2017 .11
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-532-001401049