목적: 본 연구에서는 안구세안액의 노출이 써클 소프트콘택트렌즈(이하 써클렌즈)의 파라미터와 염료용출에 미치는 영향을 알아보고자 하였으며, 또한 안구세안액 노출로 인해 변화된 써클렌즈 파라미터의 회복여부를 확인하고자 하였다. 방법: 하이드로겔 써클렌즈 4종(etafilcon A, hilafilcon B, nelfilcon A 및 polymacon 재질)과 실리콘 하이드로겔 써클렌즈 1종(lotrafilcon B 재질)을 선택하여 안구세안액에 각각 1시간, 2시간, 4시간 및 8시간 동안 노출시켰다. 안구세안액 노출 전후에 각 렌즈의 굴절력, 중심두께, 전체직경, 곡률반경, 함수율 및 가시광선 투과율을 측정하여 렌즈 파라미터의 변화를 확인하였고, 염료용출 여부는 면봉테스트 및 주사전자현미경 촬영을 통하여 확인하였다. 결과: 안구세안액 노출 후 고함수 하이드로겔 렌즈인 etafilcon A 및 nelfilcon A 써클렌즈의 굴절력은 통계적으로 유의한 증가를 나타내었으며, 이들의 전체직경, 곡률반경 및 함수율은 통계적으로 유의한 감소를 나타내었으나 재질의 이온성 여부에 따라 노출시간에 따른 변화양상은 상이한 것으로 분석되었다. 반면, 고함수 비이온성 재질인 hilafilcon B 써클렌즈는 중심두께 및 직경이 노출 1시간까지 증가하는 것으로 나타났다. Polymacon 및 lotrafilcon B써클렌즈의 파라미터는 안구세안액 노출에 크게 영향을 받지 않는 것으로 나타났다. 안구세안액 노출에 따른 써클렌즈의 파라미터 변화는 다목적용액으로 처리 시 1시간 후 모든 서클렌즈에서 노출 전의 값과 통계적으로 유의한 차이가 없는 수준으로 회복됨을 알 수 있었으며, 8시간 후에는 nelfilcon A 써클렌즈를 제외하고 모두 식약처 허용오차기준 이내의 값으로 회복됨을 확인하였다. Hilafilcon B, polymacon 및 lotrafilcon B 재질 써클렌즈에서는 안구세안액 노출 전후 면봉테스트 시 모두 염료용출이 확인되었으며, 안구세안액 노출 8시간 후에는 주사전자현미경 관찰 결과 표면손상을 확인할 수 있었다. 결론: 본 연구결과 안구세안액 노출 시 고함수 써클렌즈는 이온성 여부에 따라 파라미터의 변화시간 및 양상이 달라지며 이러한 변화는 다목적용액 처리 시 모두 식약처 허용오차기준 내로 회복됨을 알 수 있었고, 써클렌즈의 염료용출과 표면손상은 파라미터 변화가 없었던 저함수 비이온 하이드로겔과 실리콘하이드로겔 렌즈에서 나타남을 확인하였다. 따라서 안구세안액 노출 후 렌즈 파라미터의 변화가 유발되었거나 표면손상으로 염료용출의 가능성이 있는 써클렌즈를 반복적으로 문질러 세척하고 착용한다면 피팅상태 뿐 아니라 안건강에도 영향을 미칠 것이라 예상된다.
Purpose: In the present study, the effect of exposure to eyewash solution on lens parameters and dye elution of circle soft contact lenses (hereafter circle lenses) was investigated. The restoration of circle lens parameters changed by exposure to eyewash solution was also tested. Methods: Four hydrogel circle lenses (etafilcon A, hilafilcon B, nelfilcon A, and polymacon) and a silicone hydrogel circle lens (lotrafilcon B) were selected and exposed to an eyewash solution for 1, 2, 4, and 8 hours. The change of lens parameters was confirmed by measuring refractive power, central thickness, total diameter, radius of curvature, water content, and visible light transmission of each lens before and after the exposure to eyewash solution. Dye elution was investigated using a cotton swab rubbing test and observation through scanning electron microscopy (SEM). Results: The refractive error of etafilcon A and nelfilcon A circle lenses, high water content hydrogel lenses, significantly increased, and their total diameter, base curvature, and water content significantly decreased after exposure to the eyewash solution; however, the pattern of change with respect to exposure time was different according to the ionicity of lens materials. On the other hand, central thickness and total diameter of the hilafilcon B circle lens, high water and non-ionic lens, increased until 1 hour-exposure time. The lens parameters of polymacon (low water and non-ionic hydrogel) and lotrafilcon B (silicone hydrogel) were not significantly affected by the eyewash solution. The change in parameters of those circle lenses as a result of exposure to eyewash solution were restored after 1-hour treatment with multi-purpose solution (MPS), indicating that there was no statistically significant difference between the levels before eyewash solution exposure for all circle lenses. After 8-hour treatment in MPS, it was confirmed that the lens parameters were recovered to within the allowable range of error provided by Korea Food and Drug Administration (KFDA) except for nelfilcon A circle lens. Dye elution was observed in the hilafilcon B, polymacon and lotrafilcon B circle lenses before and after exposure to the eyewash solution as assessed using the cotton swab rubbing test, and surface damage was observed using SEM after 8 hour-exposure to eyewash solution. Conclusions: From the results of this study, it was revealed that the change over time and pattern of lens parameters in high water circle lenses varied based on ionicity when exposed to eyewash solution, and these changes were all restored to within the allowable range of error provided by KFDA when further treated with MPS. Dye elution and surface damage of the circle lenses were observed in non-ionic low water hydrogel and silicone hydrogel lens exhibited no parameter change. Therefore, it is expected that repeated rubbing and/or wearing circle lenses that have induced change of lens parameter or possibility of dye elution due to surface damage after exposure to eyewash solution will affect not only the fit of the lens but also eye health.